Proxxon 38128 TBM Bench Drill Machine
List Price: $258.00 Our Price: $217.79 You Save: $40.21 (15.6%) | Availability: | Usually ships in 24 hours (as of 10:53 AM CT - detail) |
110-120V, 65HZ, 85W comes with 6 steel collets size 1/32, 1/16, 5/64, 3/32, 7/64 and 1/8 inches (1.0, 1.5, 2.0, 2.4, 3.0, 3.2 millimeter)Recommend clamp work pieces with Proxxon Machine Vise number 28132 or 24260Convert this machine into a high precision machining center with use of 24256 Proxxon KT 70 Micro Compound TableOptional Proxxon Original German Rohm Chuck umber 28122 available
Product Description
The unit offers a high quality machined work table of ribbed die-cast aluminum (worktable size 8 21/32" x 4 23/32" (220 x 120 mm) providing an adjustable fence with scale. The solid, hard-chromed steel column is 11" high (280 mm) and has a diameter of 3/4" (20 mm). The 110-120V/85W motor, which runs very quiet and has a long life expectancy is built in to the super stable die-cast head of the machine. The power transmission by 3-step aluminum pulleys and flat belt provides 3 spindle speeds of 1,800, 4,700 and 8,500 rpm allowing triple torque at low speeds. The chrome feed lever has an adjustable depth scale. The spindle is essentially free of play as a result of the 3 high quality ball bearing assemblies. For the insertion of MICROMOT steel collets it is recessed, but also threaded for attaching drill chucks with 3/8" thread (for this option see below the Roehm drill chuck, which we offer as an accessory). The spindle has an extremely high rotational accuracy and a 1 3/16" (30 mm) feed. The quill diameter is 1 1/4" (32 mm) with return spring, the throat depth (column to drill spindle) 5 1/2" (140 mm). The unit provides quick coarse height adjustment of headstock via clamp lever. The max. height (worktable surface to spindle end) is 5 1/2" (140 mm). The unit comes with six triple slit MICROMOT precision steel collets for shaft sizes ranging from 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" (1.0, 1.5, 2.0, 2.4, 3.0, 3.2 mm).
Spotlight Customer Reviews:
Comment:
This bench drill, along with the extra accessories I bought is a good performer considering its relatively low cost. It is actually a very accurate machine, with the exception of the optional vise, which is really junk, but it works. If you have the time and tools and the skills I'd suggest you adapt a better quality vise.
|
Summary:
|
A copy of the Micro Mark #81631 using collets.
|
Comment:
This drill press is a knock off of the Micro Mark #81631 Micro Lux drill press with a few variation.
First, this unit is Made in Germany, while the original Micro Mark drill press is Made in Japan. The quality appears to be almost equal.
The Proxxon is painted in their green and mustard yellow colors. The Mirco Mark is black and grey.
The Proxxon drill press comes with and can use either their collet system or a 3/8"-24 threaded drill chuck, which is optional. The Micro Mark drill press comes with a 1/4 inch capacity chuck with no collets or capability to accept collets. For it's intended purpose as a drill press, this is just fine.
The Mirco Mark drill press generally cost less, especially when purchased from them when on sale or with free shipping offers.
I have used both. I own the Micro Mark.
|
Summary:
|
Proxxon 38128 TBM Bench Drill Machine
|
Comment:
Well built machine for VERY light duty jobs. Spindle is very true, a must for small bits. The vise is not included, buy it for $20, and I also like the keyed chuck, # 28122 @ $14.70. Best solution for fine drilling.
UPDATE: The 28122 chuck will accept 1/4 inch shaft grinding stones,buffers, these shaft size items are much cheaper than Proxxon, Dremel items. I lay the machine on its side as needed to use some of these.
|