DELTA 15-333 15-Inch Variable Speed Drill Press with Tilting Table and Magnetic Starter
List Price: $6,679.20 Our Price: $3,216.11 You Save: $3,463.09 (51.8%) | Availability: | Usually ships in 24 hours (as of 5:36 PM CT - detail) |
Extra-large spindle bearings 6 PLUS 6- and -VS6 spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings.Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450-4,700 rpm with a 1,725 rpm motor.Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring-loaded, rubber-tipped plunger that quickly restores correct belt tensionExtra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling.Six speeds offer unbelievably wide range of speeds with a low-cost 1,725 rpm motor- 425; 600; 1,100; 2,050; 3,900 and 5,500 rpm- 11.8 to 1 speed ratio.
Product Description
The DELTA 15-333 Variable Speed Drill Press features a 3/4 HP three-phase motor that has a 24-volt push-button, magnetic starter. It has a variable-speed drive allowing you to select a different spindle speed while the machine is running. The drill maintains proper belt tension automatically so you'll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key.
|