Accessories \ Milling Accessories

End Mills

	1. Pair of 1" x 2" x 3" Blocks Features: Precision ground. Case hardened. Cross-drilling design for extra strength and minimum weight. Five 3/8-16 tapped holes are provided for clamping. Average Customer Rating: Description:  Heat treated above 48 Rockwell "C"; .0001 to .0003 over allowance for nominal lapping. Squareness of all sides is within .0002 per inch. Availability: Usually ships in 24 hours (as of 3:30 AM CT - detail) Our Price: $13.95
	2. End Mill Set, 6 Piece 4 Flute Features: 6 piece HSS end mill set 4 flute end mills Center cutting end mills Includes 1/8", 3/16", 1/4", 5/16", 3/8", 1/2" end mills All end mills have 3/8" shank. Average Customer Rating: Description:  The set comes in a wood stand. Availability: Usually ships in 24 hours (as of 3:30 AM CT - detail) Our Price: $23.95
	3. End Mill Set, 20 pieces 2 & 4 Flute Features: 20 piece TiN coated HSS end mill set Includes both 2 flute and 4 flute end mills Center cutting end mills 3/16" to 3/4" by 16ths Average Customer Rating: Description:  The 3/16" through 7/16" end mills have a 3/8" shank. The 1/2" and 9/16" end mills have a 1/2" shank. The 5/8" and 11/16" end mills have a 5/8" shank. The 3/4" end mill has a 3/4" shank. The set comes... more Availability: Usually ships in 1-2 business days (as of 3:30 AM CT - detail) Our Price: $64.95
	4. Precision Twist EB6304V Solid Carbide End Mill, TiAlN Coated, 4 Flute, Ball End, 1-1/2" Cutting Length, 1/4" Cutting Diameter Features: Extra length, for usage with wider material or longer reach Ball nose end mills are used to machine three-dimensional curved shapes Titanium aluminum nitride (TiAIN) coating, for high-temperature, high-speed machining and without coolant Carbide, for excellent wear resistance and long tool life Four flutes, for better surface finish and reduce chip load Average Customer Rating: Description:   The Precision Twist EB6304V series of end mills are a extra length, ball nose, two flutes are made of carbide with a TiAIN finish is used for high speed machining of curved surfaces and best... more Availability: Usually ships in 1 to 4 months (as of 3:30 AM CT - detail) List Price: $58.80 Our Price: $32.56 You Save: $26.24 (44.6%)
	5. Niagara Cutter C430 Carbide End Mill, General Purpose, TiAlN, 4 Flutes, Square End, 1-1/8" Cutting Length, 3/16" Cutting Diameter Features: Four flutes produce a better finish than fewer flutes Square nose end mills (also called square end) create sharp, unrounded cuts Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling Average Customer Rating: Description:   The Niagara Cutter C430 TiAlN-coated carbide square nose end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The tool’s square end creates... more Availability: Usually ships in 3 to 5 weeks (as of 3:30 AM CT - detail) List Price: $26.34 Our Price: $24.95 You Save: $1.39 (5.3%)
	6. Niagara Cutter CB430 Carbide End Mill, General Purpose, TiAlN Coated, 4 Flutes, Ball End, 1/4" Cutting Length, 1/8" Cutting Diameter Features: Four flutes produce a better finish than fewer flutes Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance, offering better heat resistance than TiN and TiCN coatings Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures Ball nose end mills (also called ball end) create contoured surfaces Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling Average Customer Rating: Description:   The Niagara Cutter CB430 TiAlN-coated carbide ball nose end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The tool’s... more Availability: Usually ships in 24 hours (as of 3:30 AM CT - detail) Our Price: $11.38
	7. Niagara Cutter S203 High-Speed Steel End Mill, General Purpose, Regular Length, Uncoated (Bright), 2 Flutes, Square End, 1" Cutting Length, 1/2" Cutting Diameter Features: Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material High-speed steel (HSS) is compatible with a variety of materials Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials Square nose end mills (also called square end) create sharp, unrounded cuts Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling Average Customer Rating: Description:   The Niagara Cutter S203 uncoated (bright) high-speed steel square nose end mill provides the efficiency of two flutes and a 30-degree helix angle for general-purpose machining on a variety of... more Availability: Usually ships in 24 hours (as of 3:30 AM CT - detail) Our Price: $17.37
	8. VME VB-2 1-1/2" Capacity V Block and Clamp Pair Features: Capacity: 1 1/2" dia. Size: 1 5/8" x 1 3/4" x 2 3/4" Average Customer Rating: Description:  Hardened and ground steel. All sides are ground square and parallel to each other. Works vertically only. 90 degree V's are ground central, parallel, and square with the ends. Matched in pairs. Availability: Usually ships in 1-2 business days (as of 3:30 AM CT - detail) Our Price: $38.40
	9. 1/16" 4 Flute Single End Carbide End Mill Features: Diam. Inches: 1/16" Shank Diam.: 1/8" Length of Flutes: 3/16" Overall Length: 1 1/2" Solid Micrograin Carbide. Style E700. Average Customer Rating: Description:  Made in USA. Single End Center Cutting. 4 Flute. Availability: Usually ships in 1-2 business days (as of 3:30 AM CT - detail) Our Price: $4.95
	10. 1/8" 4Fl SE Ball Carbide End Mill Features: Diameter Inches: 1/8" Shank Diameter: 1/8" Length of Flutes: 1/2" Overall Length: 1 1/2" Solid Micrograin Carbide. Style E705. Average Customer Rating: Description:  Made in USA. Ball End. Center Cutting. 4 Flute Single End. Availability: Usually ships in 1-2 business days (as of 3:30 AM CT - detail) Our Price: $6.50