 |
|
1.
Bosch TS1002 Table Saw Rear Outfeed Support Extension
Table saw rear outfeed support extensionExtends 18-inches and stores flush to table; extends working depth of Bosch 4000 10-inch table sawHardened metal construction; aluminum mountsIncludes 1 table saw extension; table saw not included1-year warrantyDescription: Bosch TS1002 extends 18-inches and stores flush to table. It extends the working depth of Bosch 4000 10-inch table saw. It features hardened metal construction; aluminum mounts and includes 1 table... more
Availability: Usually ships in 24 hours (as of 4:25 AM CT - detail)
List Price: $44.98 Our Price: $31.05 You Save: $13.93 (31%)
|
 |
|
2.
Bosch TS1003 Table Saw Left Side Support Extension
Table saw left-side support extension for Bosch 4000 10-inch worksite table sawExtends table additional 12-inches for working with wide and long-pieces; stores flush when not in useAluminum construction; 5mm hex wrench and needle nose pliers needed for installationIncludes 1 table extension; table saw not included4.4-pounds; 1-year warrantyDescription: The Bosch TS1003 Left Side Support Extension increases the width of the table to 52-Inches when used with the Bosch 4100-09 or 4100DG-09 10-Inch Worksite Table Saws. Features: Left side support... more
Availability: Usually ships in 24 hours (as of 4:25 AM CT - detail)
List Price: $32.62 Our Price: $24.62 You Save: $8.00 (24.5%)
|
 |
|
3.
DEWALT DW7351 Folding Table for DW735 Planer
Two tables designed to work with the DW735 PlanerComes with an easy install hardware kitBacked by a 3-year warrantyLightweight and tough aluminum constructionDescription: Designed to work with the DW735 planer, the DeWalt DW7351 folding tables are detachable and can be folded for convenience. With lightweight and tough aluminum construction, these 13-inch long tables... more
Availability: Usually ships in 24 hours (as of 4:25 AM CT - detail)
List Price: $75.04 Our Price: $49.80 You Save: $25.24 (33.6%)
|
 |
|
4.
General Tools S838 6 Piece 3/16-Inch to 1/2-Inch Drill Stop Assortment
For use on twist or brad point drills to prevent excessive drill penetrationPositive depth control assures exact hole depths for multiple drilling jobsBlack oxide finish on cold rolled steelSizes included: 3/16-, 1/4-, 5/16-, 3/8-, 7/16-, 1/2-inch diametersIncludes hex wrenchDescription: Use with twist drills to prevent excessive penetration. Black oxide finish on cold rolled steel. Sizes included: 3 16", 1 4", 5 16", 3 8", 7 16" and 1 2". Includes hex wrench.
Availability: Usually ships in 24 hours (as of 4:25 AM CT - detail)
List Price: $14.09 Our Price: $11.74 You Save: $2.35 (16.7%)
|
 |
|
5.
Biesemeyer 78-989 T-Square Dual Pointer Cut-Off Saw Stop
For repeatable 90-degree straight cutsConstructed of rugged steel componentsHand-calibrated at the factory for added precisionProvides accurate measurements down to 1/64th of an inchInstalls easy; measuring tape not includedDescription: Biesemeyer 78-989 T-square Dual Pointer Cut-Off Saw Stop eliminates the need for cumbersome C-clamps. This Biesemeyer cut-off stop is designed to glide effortlessly along a 1-1/2-x-1-5/8-inch fence.... more
Availability: Usually ships in 24 hours (as of 4:25 AM CT - detail)
List Price: $130.98 Our Price: $99.99 You Save: $30.99 (23.7%)
|
 |
|
6.
Makita 192118-2 Extension Kit
Set of two holdersFits model numbers ls1030 and ls1011
Availability: Usually ships in 24 hours (as of 4:25 AM CT - detail)
List Price: $42.20 Our Price: $35.44 You Save: $6.76 (16%)
|
 |
|
7.
Rousseau 6000L 60-Inch Stop System
60-inch long uses two stops for accurate cut out to 10 -1/2 inchesBoth stops have adjust hairline indicators for proper alignmentDescription: Dual stop system fits model No. 2950 Rousseau miter saw and No. 6112 support wing. For left and right side. Adjustable hairline indicator for exact cuts. No measuring, marking, or visual line up.... more
Availability: Usually ships in 24 hours (as of 4:25 AM CT - detail)
List Price: $199.00 Our Price: $147.55 You Save: $51.45 (25.9%)
|
 |
|
8.
Milwaukee 49-52-0110 Guide Rod Assembly For Use With Milwaukee 6494-6, 6496-6 & 6497-6 Miter Saws
Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee toolfor model numbers 6494-6, 6496-6, and 6497-6 Milwaukee miter sawsDescription: Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee tool. If unable to... more
Availability: Usually ships in 24 hours (as of 4:25 AM CT - detail)
List Price: $37.40 Our Price: $26.89 You Save: $10.51 (28.1%)
|
 |
|
9.
Hitachi 998866 Extension Assembly
Extension assemblyFor Hitachi C8FB2 8-1/2-inch slide compound sawDescription: EXTENSION WING ASSY C8FB2/10FS
Availability: Usually ships in 24 hours (as of 4:25 AM CT - detail)
Our Price: $21.82
|
 |
|
10.
JDS Company ACCU-STOP Table Saw Miter Gauge Extra Stop
Outer rail end stopInner rail stopAn extra stop for accu-miter
Availability: Usually ships in 24 hours (as of 4:25 AM CT - detail)
List Price: $59.92 Our Price: $39.85 You Save: $20.07 (33.5%)
|
 |